No data

No data

Next, let’s discuss how to use the smart health-care bed.


Release Date:

2022-11-29

Next, let’s discuss how to use the smart health-care bed. The operating procedures are as follows: 1. Adjusting the bed’s body position: Grasp the head-position control handle, release the self-locking mechanism of the air spring, and extend the piston rod to slowly raise the head-end section of the bed surface. When the desired angle is reached, release the handle, and the bed surface will lock in that position. Conversely, press down on the handle to lower the head end. In addition, if a patient lying supine on the smart health-care bed wishes to turn onto their side, first pull out the small side headboard on one side, lower the corresponding side guardrail, and then, with one hand, press the control button on the outer side of the bed surface to release the self-locking mechanism of the side air spring. This will extend the piston rod, causing the side bed surface to rise slowly; when the desired angle is achieved, release the control button to lock the bed surface in that position, thereby completing the lateral decubitus position starting from the face. Note: The reverse procedure can be performed in the same way. 2. Using the bed’s commode: Turn the commode handle clockwise, and the commode lid will automatically open; the commode will then slide horizontally toward the patient’s buttocks, facilitating defecation or cleansing of the perineal area. Turning the commode handle counterclockwise will close the defecation lid, bringing it flush with the bed surface, and the commode bowl will automatically move to the operator’s side for collection and cleaning by the nurse. After cleaning, the commode bowl will be returned to the commode rack for reuse. 3. Smart

Now, let’s talk about it. Smart Health Care Bed What is the method of use? ?

This Smart Health Care Bed The method of use is as follows:

1. Smart Health Care Bed Body adjustment: Grip the head-position control handle, release the self-locking mechanism of the air spring, extend the piston rod to slowly raise the bed surface at the head end; when it reaches the desired angle, release the handle, and the bed surface will be locked in that position. ;Similarly, grasp the handle and apply downward pressure to lower it.

In addition, if Smart Health Care Bed Above When the patient wishes to turn from a supine to a lateral position, first extend the side headboard, lower the corresponding side guardrail, and press the control button on the outer side of the bed surface with one hand to release the self-locking mechanism of the side air spring. This causes the piston rod to extend, gradually raising the side bed surface. Once the desired angle is reached, release the control button to lock the bed surface in that position, then complete the lateral positioning starting from the face. Note: Perform the reverse procedure using the same steps.

2. Smart Health Care Bed Use of the commode: Rotate the commode handle clockwise to automatically open the commode lid and extend the commode horizontally to the patient’s buttocks, facilitating defecation or perineal cleansing. Rotating the handle counterclockwise closes the commode lid, bringing it flush with the bed surface, and automatically retracts the commode bowl to the caregiver’s side for removal and cleaning. After cleaning, the commode bowl is returned to the commode rack for subsequent use.

3. Smart Health Care Bed When using the guardrail, grasp the upper edge of the side guardrail horizontally and lift it vertically by approximately Rotate the 20 mm guard downward by 180 degrees, then lower the guard; next, lift the guard and rotate it 180 degrees again, followed by applying vertical pressure to complete the lifting of the side guard. Note: The foot guard is operated in the same manner.

4. Smart Health Care Bed How to use the living room: Align the opening of the plastic component at the back of the living room with the top edge of the side guardrail, then press downward—hold the guardrail firmly with one hand and lift the living room table with the other to remove it.

5. Smart Health Care Bed Use of the infusion stand: The infusion stand can be used regardless of the bed’s position. To use it, first screw the two sections of the stand together to form a single unit, then align the lower hook of the stand with the upper crossbar and the upper hook head with the circular hole on the side guardrail’s upper tube; press down firmly to secure it, then lift the stand to remove it.

6. Smart Health Care Bed Using the brake: Pressing the brake with your foot or hand applies the brake, while lifting your foot or hand releases it.

7. Smart Health Care Bed Use of the safety belt: When the patient is using the bed or needs to change position When seated, always wear your seat belt to prevent accidents.

Related News

undefined

undefined